11 Ways To Completely Redesign Your Double Glazing Lock Repairs

Double Glazing Lock Repairs
Good locks on your doors and windows can stop burglars from entering your home. They don't usually like to break glass or try to squeeze through windows.
However, some double glazing owners have had issues with their door lock or window lock after it was installed. Fortunately, these issues are usually fixable and don't require to buy new double glazing.
Broken or faulty locks
If your uPVC door or window lock is damaged or defective and requires a locksmith, they can fix it. They can repair hinges, striker plates and locks for double-glazing. They can also adjust the cylinder's position to fix any misalignment issues that could be causing your handle to not operate correctly.
The mechanism may be locked when the key is inserted into the lock, but it will not turn or be difficult to insert. This can be due to grime or dirt getting stuck inside the mechanism. If this is the case, it may be possible to clean the lock and then lubricate. Use a dry lubricant like graphite or Teflon and not oil, as oil can attract dirt, and cause it to stick to the inside of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should make through the mechanism and the lock should be able turn without difficulty.
Loose screws within the lock mechanism are another reason for a broken lock. They may loosen and fall out, or even break completely preventing the lock to work properly. The screws can be tightened using the help of a screwdriver. However, be cautious not to tighten them too much. This can damage the internal components.
A faulty lock is dangerous for you and your family. This is especially the case if you have children. They can easily unlock the door without knowing, giving them access to your house. If you're concerned that this might occur, a professional locksmith can help re-secure the double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on both uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your particular requirements, which means that in a lot of cases replacement windows and doors are not required.
Handles that are damaged or broken
Many double glazed windows feature the multi-point lock as part of the overall security package. This is an excellent option for those concerned with opportunistic thieves looking for ways to gain access to your home. Ask your locksmith for antilift locks. double glazing repairs can be put in in addition to existing locks and aid in keeping your windows shut.
Handle locks can be damaged or fail. They are the first component that a criminal will utilize to force open your window. Luckily, the good news is that this is one of the most simple parts to fix.
Modern uPVC handles and aluminum handles are equipped with a multi-point locking mechanism known as Espagnolette which is designed to resist forced entry. This security upgrade is often provided as an additional option on new uPVC window installations. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems also as an optional extra on new double glazed window installations.
When a handle is faulty it is essential to get the handle repaired as quickly as you can. The damaged handles could stop the window from closing properly and permit drafts to get in. It may also be a weakness that burglars with a plethora of opportunities could exploit, therefore putting your belongings and family at risk of theft.
To repair the damaged mechanism, you must first gain access to the window frame, then take off the broken handle. The gearbox is then opened to identify the type of gearbox used to open the handle. This will allow an alternative that is compatible with the profile and internal window frame mechanisms.
After the mechanism has been replaced the handle can then be fixed using the original screws however, we generally recommend replacing them with larger ones as this will give the most secure fit. The final step is to seal the handle using an opaque sealant. This will protect it from further deterioration. After this step is completed the window should be functioning again at a fraction of the cost of replacing it.
Hinges that are broken or faulty
If your windows do not close properly, you could suffer from draughts or a weakening of your home's security barrier and a higher risk of damp or water damage. Windows hinges that break or become faulty are a common problem and can be easily repaired.
If your uPVC windows don't open or shut, it is likely that hinges need to be replaced or repaired. Most window companies will require that you purchase a new window unit to address this problem, but we can replace the hinges and save you money.
Window hinges can often break due to repeated use or may be weakened through rust over time. If you have a broken window hinge, it's important to take precautions to prevent further damage. This includes not causing the window to close or open.
The type of hinge you are looking for will help you find the right parts to repair it. The most commonly used types of window hinges include Maco, Mila, Roto and other brands. Get advice from a professional before purchasing parts that won't work with your existing hardware. This can cause more damage.
Faulty hinges are a major problem for uPVC windows and doors. They can be a major source of noise, and can also permit water to enter your windows.
Make sure that the pin barrels on both hinge halves are aligned. If not then tap the head pin with an hammer to create a shallow bend in the hinge barrel. This will hold the pin in place. Then, ask a friend to hold the door as you take the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges and then install screws using glue. Finally fix the hinges using clamps or weights while the glue is drying.
After you have fixed your hinges, you can reinstall the door. You can also reattach the handle. Replace the screws using wood dowels of the same length as the original screw to ensure that they are compatible.
Glass that is broken or damaged
While uPVC windows do an excellent job of keeping the cold out and heat in, they can become damaged over time. This could include broken or damaged glass, as well as faulty locks. If neglected, this could be a costly problem. It can also hurt your home's aesthetics and result in a decrease in insulation. It is important to repair any damage immediately.
If your glass has broken but isn't shattered it is possible to fix it yourself with the proper tools and techniques. Make sure the area surrounding the glass that has been broken is free of debris so that any shards do not cause injury or cause a trip hazard. Then, remove any broken glass pieces and dispose of them in the appropriate manner. Apply masking tape across the entire area. This will prevent glass fragments from sticking to your skin and scattering when you move them. If you're dealing with a double-pane window it's best to fit the glass pane before gluing it back into place so that you know you'll have enough room to complete the project.
Before applying the glue clean the entire surface of the broken frame and the glass with a an unclean, dry cloth. Follow the curing and application instructions that may differ from product to product. Based on the direction of the crack, you may want to secure the glass during the curing process with lightweight clamps that are designed to hold fragile materials.
Once the adhesive is fully cured, carefully reinstall the glass in the window frame, making sure that it is flush with the edge of the frame, and there are no gaps between the glass and the window sash. Be careful not to bend the glass when you put it back in place, as this could weaken the seal. This could lead to water infiltration or condensation.
If you have a glass window that's broken completely or has bigger cracks, contact a professional glazier such as O'Brien(r) to arrange a replacement. Unattended handling of broken glass can pose a safety risk for pet and children, so it's essential to act fast.