20 Fun Facts About Window Repair

Window Repairs
Window repairs can help homeowners save money while maintaining their comfort. In the event of severe damages, like broken glass or a damaged frame, a replacement window may be necessary.
Many other problems can be fixed to extend the longevity of windows. Some common issues include:
Cracked or broken panes
Glass that is cracked can be caused by a lawnmowers that throws errant rocks or by branches of trees being blown by strong winds. This is not only visually awful, but it could cause higher energy bills as the broken pieces let cold air in to your home. Luckily, it's typically easy to repair windows that have broken panes.
Begin by carefully removing glass using gloves and glasses. You may need to use a utility knife to loosen old glazing compound or putty around the frame's edges. Next, wipe down the glass's surface and the frame's wood using a soft cloth or paper towel.
After cleaning the area, apply a silicone caulking that is water-proof around the frame's perimeter. This prevents water from entering through the crack, which could cause further damage to both the frame and the glass.
If you have double-pane glass a bad crack could compromise the gas layer between the panes and make your windows less efficient in insulating. If the crack is so extensive that it threatens the integrity of the window or if the inner pane is missing it is possible to consult an expert.
Thermal stress cracks can also happen when there's a dramatic difference in temperatures between the inside and outside of your home, causing the glass to expand or contract. If this happens on two windows, it's probably best to simply replace the pane instead of attempting to repair it.
Clear tape can be used to seal cracks in windows that are not yet ready to be replaced. It will also keep out bugs and cold wind. You can also cut a nylon stocking large enough to completely cover the crack, and then attach it using duct tape. It's not a permanent solution, but it can keep insects out and cold air away from your home. If your windows are old and you're starting to notice cracks in the glass, it's an excellent idea to talk with your local window company to determine if replacing the entire window would be a better option for you.
Rotten Wood
Wood rot is one of the most common problems with windows. It can degrade a house's appearance and create a safety risk. It is possible to fix damaged wood. window repairs near me will first need to determine the root of the wood's decay. Look for leaks on the roof and other areas that water may get into the wood.
The next step is to take out any rotten parts of the window frame. This can be done using either a chisel, a rasp or claw hammer. After the areas that are rotten have been removed then you must replace them with new wood. Pre-treated wood is recommended for this task, since it will resist the onset of rot. If you are unable to replace the damaged timber then you can use wood filler and hardener to reinforce the damaged area. The majority of hardware stores have this type of product. Follow the directions on the label of the product to get the most effective results.
After you have repaired the damaged areas of the window sill, it is crucial to protect the area. This can be done by applying an water-resistant wood sealant. A product such as Sikkens is a great choice for this job.
You can also use an epoxy filler that is two-part to protect the wood from further damage. This product is easy to apply and leaves a nice finish. It is essential to follow the instructions on the label. Once the epoxy filler has dried it is possible to sand the wood's surface. It is best to start with a rough piece of sandpaper and then move to a smoother one.
You don't want to expose your damaged part to further moisture. It is recommended, that's why you should protect the surface you have repaired with an oil-based prime which will shield it from moisture. Then, you can apply the waterproof wood sealant.
It won't open
The reason a window won't open can be caused by a variety of factors. Wood frames can warp when exposed to wet weather, the house could have settled or someone may have nailed it shut for security reasons. With a little patience and the right tools you can open the majority of stuck windows.
Gunk or debris that has accumulated can be a major cause of windows that aren't opening. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks, and locks. Metal hardware can also rust when it comes into contact with humidity and direct sunlight. Spray grease on these areas will aid in preventing oxidation and keep your windows functioning correctly.
Stuck windows can be the result of the breaking or loosening of the pulleys that are used to lift and lower the window. These components can lose their tension and cause obstruction, especially when the window is situated at least two stories above the ground.
If you have difficulty opening a door, use a pry-bar to gently open the window. Put a piece of wood on the frame to give the pry bar more leverage and be careful not to damage the window or wood. Try running a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.
A damaged spring can be the cause of windows that don't raise or lower. You'll need to refer to the owner's manual for additional information depending on who made your windows.
If you have tried cleaning the moving parts of your windows and lubricating them but they're still unable to open It could be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows of your home become functional to inoperable. A window that isn’t properly shut can make your home vulnerable to water damage and burglary. Contact us today for more information about our replacement windows and services!