The Biggest Problem With Double Glazing Door Lock Repairs And How You Can Repair It

Double Glazing Door Lock Repairs
Has your uPVC window or door mechanism become faulty? Maybe the window or door handles don't meet up properly or are difficult to use.
It's important that your double-glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith will be able to repair your door lock at reasonable costs.
Snapped Key
When a key snaps off inside a lock, it could be extremely annoying. It can also be a security problem in that it can leave you vulnerable to burglars if your door is not locked. There are a couple of quick fixes you can try to fix the problem and make your door functional again.
Be sure to remain calm. If you panic, you could end up pushing the broken key piece further into the lock.
Then, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slip out more easily. You can also use a screwdriver to help break up any stuck pieces that might be hindering the flow. If you have a chunk of the key that is still sticking out and is not being removed, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods are effective, but you need to be careful not to push the damaged key further into the keyway.
Some paperclips have grooved edges, which can serve to extract hooks, and some Jigsaw blades also work for this purpose. If you don't have any of them handy, you can make use of needle-nose pliers that bend to create hooks. Additionally, you can use a pair of tweezers grab and remove the last bit of the broken keys.
If you're unable to pull the broken piece of the key out, try using a lock de-icer. It is available at all hardware stores, and it works by freezing any water or ice that could be inside the lock.
If none of these solutions work, it may be time to contact a locksmith. Fitlocks experts can quickly fix issues such as broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. Get a double glazing repair via our website, or give us a call to discuss your requirements.
Broken Cylinder
A broken cylinder can pose a serious security risk. A locksmith professional can fix the cylinder. Locksmiths will need to tap the cylinder to fix it. This can be accomplished with the hammer or other tool. However, the most effective method is to make use of a wire or a long match. Place the match or wire end near the keyway. The locksmith can hit the lock to break it open. This is more secure than using a hammer that could harm the lock.
The most common cause of cylinder head cracks is overheating. This can happen when the cylinder block and head are made of different metals, including cast iron and aluminium. Different metals will heat up and cool off at different rates. This can cause localized hotspots to expand faster than the rest.
Another possible cause for cylinder cracks is corrosion. If the cylinder head and the block of the cylinder are not maintained properly, this could result in corrosion or rust and cause them to expand at a a higher rate than they should. As time passes, this may also cause cracks.
If your uPVC window or door lock is stiff and requires more pressure to turn, it could be due to a variety of reasons. A defective locking mechanism, misalignment, or an old handle are the most common causes of this issue.
Fortunately, this is an easy and affordable fix for the majority of double glazing owners. A professional locksmith should be able solve this problem within an hour of arriving at your home. They can repair the locking mechanisms, or replace the window handles and replace the gearboxes, based on your particular requirements. A skilled locksmith will always be able to advise you of the most cost-effective option for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders which offer an additional layer of protection from burglars. It is a small cost to pay for the peace-of-mind that comes from knowing that your uPVC door is secured.
Broken Handle
Window handle locks have intricate mechanisms that wear out with time and use, so it's no surprise that they sometimes break. It isn't always easy to pinpoint the cause of the broken window handle lock and repair it correctly.
Repairing your damaged handle, whether it's the internal latch or locking mechanism can increase the security of your uPVC door and prevent draughts. If you do not repair or replace the handle could be costly and may cause damage to the door's frame and lock It is therefore worth taking some time to do it right.
Screwdriver Open the window and the screw loose, loosen the handle. The screw should be located on the inside of the backplate, usually concealed by the cap of the screw for aesthetic reasons. Be careful not to lose any internal components within the handle, like the levers or plates on the opposite side of the spindle. It is best to keep them in the same order so you can replace them again if needed.
Then, rotate the handle so it's at 90 degrees to the window frame and loosen the screw on the back of the handle that fixes it to the internal spindle with a second screwdriver. Once double glazing repairs Epsom is loose, pull the handle out and remove the broken spindle. Replace it with a brand new one, ensuring it's the same size as the old one (you will typically find them on the internet or in hardware stores) and screw it securely in place. Be cautious not to overtighten because this could damage the handle or the window frame.
Check that the new handle is correctly fitted Close the window and test the handle. Hopefully, it will work smoothly and you'll be able unlock your window.
Make sure to check that your uPVC window is closing properly when you're working with the handle. If they aren't closing properly, you may experience draughts or damp in your home. Also, you could be compromising the energy efficiency of your home. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they shut correctly.
Broken Spindle
It is more common for the spindle to break rather than the handle. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that acts as an electronic locking mechanism within the frame of the window. The handle is connected to a central rod which in turn activates cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned, it is possible that the spindle has been damaged, this can be an extremely frustrating issue.
Fortunately there are options to rectify this issue. A reputable locksmith can quickly and effectively address this problem. A good locksmith will be able disassemble the handle of the window by using a tool to remove the wheel from the area where the spindle is located. This can be done with no damage to the handle or window frame.
Once the wheel has been removed the technician can then inspect the spindle and determine what caused it to break. This involves breaking down the spindle into its individual components and carefully observing their general condition, as in addition to any specific areas of damage or excessive wear. This procedure is typically performed by technicians in an environment that is clean.
The next step is to clean the damaged spindle, this assists in removing any debris or dirt that could be hindering its normal operation. The spindle can be replaced or repaired. If it is replaced, the technician could use the dowel that is similar in size to the original and drill mating holes in both pieces of the spindle. This will ensure that the new spindle is a precise fit with the handle.
If the damaged spindle cannot be repaired, it could require replacement. Home centers sell generic replacements but if the style of your window is rare then it is necessary to contact a wood worker or cabinet maker who can duplicate the exact model for you. Once the spindle has been installed, it is fixed to the handle. Line up the screw holes on the handle to the existing screws in the frame. Once the handle is seated, you can operate your uPVC windows.