20 Fun Facts About Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs
Is your uPVC window or door mechanism faulty? Maybe the handles on your uPVC windows or doors are not aligned properly or are difficult to operate.
You will lose energy when your double-glazed doors do not work properly. This also increases the likelihood of burglaries. Owen the Locksmith can repair your door lock at an affordable price.
Snapped Key
It can be quite frustrating when a key snaps inside the lock. It can also be a security problem in that it can expose you to a burglar if the door is not locked. There are a couple of quick solutions you can use to fix the problem and get your door working again.
Remember to remain calm. If you panic and start playing around with your keys, you might just end up pushing the broken piece of the key deeper into the lock, which could make the situation even more difficult.
Then spray WD-40 or another penetrating oil into the lock to make the broken piece to slide out more easily. You can also use the screwdriver to break off any pieces that are stuck. If you have a part of the key that's stuck then grab it using a paperclip or other thin metal object and pull it. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.
Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of these handy, you can use needle-nose pliers to bend them and create hooks. Finally, you can use a pair tweezers to grasp and pull out the last bit of the broken keys.
If you cannot remove the broken piece of key, use a lock deicer. It's available at most hardware stores and is used to freeze any moisture present inside the lock.
If none of these solutions work, it might be time to consult a locksmith. The experts at Fitlocks can quickly solve problems with uPVC door locks and mechanisms such as snapped keys and broken handles. They can also alter the double glazing door mechanisms so that they are more easy to operate. Get a double glazing repair through us online or give us a phone call to discuss your requirements.
Broken Cylinder
A damaged cylinder could pose an extremely risky security issue. It's fortunately a simple repair for a professional locksmith to complete. To fix the cylinder locksmiths must tap it. This can be done using a hammer, or any other tool. The best method is to employ a wire or long match. Place the match or wire's end close to the keyway. The locksmith will then hit the lock to break it. This is much safer than using a hammer that can cause damage to the lock.
Overheating is the most common cause of cylinder heads cracking. This can happen when the block and the cylinder head are made of various metals, such as cast-iron or aluminum. When the different metals heat up and cool down at different rates, it may create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.
Another possible cause for cracks in the cylinder is corrosion. If the head and block of the cylinder are not maintained properly, they can be corroded or rust, which can cause them to expand faster than they would normally. Over time, this can cause cracks.
If your uPVC window or door lock is stiff and requires a lot of pressure to turn, it could be due to a variety of causes. This problem can result from a defective locking mechanism or misalignment and also a worn out handle.
Fortunately it is a simple and inexpensive fix for most homeowners of double glazing. A professional locksmith should be able to resolve the issue within an hour after arriving at your residence. They can fix the locking mechanisms, or replace the window handles, and also change the gearboxes based on your specific needs. A locksmith with experience can always advise you on the most cost-effective solution for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders that provide an additional security layer from burglars. This is a small price to pay for the peace of mind that comes from knowing that your uPVC doors are safe.
Broken Handle
It's not a surprise that window handle locks may break. They are equipped with complex mechanisms which deteriorate over time. It isn't easy to determine the reason behind the problem and then fix it properly.
Whether the problem is related to the locking mechanism inside or the latch, fixing the broken handle will improve your uPVC double glazing door's security as well as help you stop the draughts. If you do not repair or replace your handle can be costly and may cause damage to the door's frame and lock, so it's worth taking the time to do it right.
Screwdriver Open the window and the screw loose, loosen the handle. This should be located on the inside of the back plate, and is normally covered by an attractive cover for the screw for aesthetic reasons. It is important to not lose any internal components of the handle, such as the plates and levers on either side. Keep them in the same order so that it is simpler to replace them in the event of a need.
Then, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle by using a second screwdriver. Once the screw is loose, you can remove the handle and take the broken spindle out. Replace it with a new spindle, ensuring it's the same length (you can find them online or at hardware stores). Securely screw it in the frame. Do not tighten the screw too much because this could damage the handle and the window frame.
Close the handle and test it. The hope is that it will function smoothly and you'll be able open your window once more.
While you're working on the handle, don't forget to make sure your uPVC windows are closing properly. If they don't close properly, you may experience damp or draughts in your home. You could also compromise the energy efficiency of your home. A local window company, like Core Sash Windows, will be capable of adjusting the hinges on your window frames so they are able to shut properly.
Broken Spindle
It is more common for the spindle to break than the handle. This is most common in uPVC tilt-and-turn windows. These types of windows require a handle which acts as a locking mechanism within the window frame. The handle is attached to a central rod which triggers a set of cams that resemble mushrooms, which lock into window frame keeps. If the dead latch mechanism does not open when the handle is turned, it is likely that the spindle is broken, this can be a frustrating problem.
There are ways to fix this problem. A good locksmith can quickly and efficiently fix this problem. They can take apart the window handle using a tool to remove the wheel component of the mechanism, where the spindle goes. This is done without causing any damage to the handle or causing any other damage to the frame of the window.
Once the wheel has been removed, the technician will inspect the spindle to determine what has caused it to break. This involves disassembling the spindle and examining every component, observing any damage or excessive wear. The process is performed in a clean, well-lit room by highly skilled technicians.
The next step is to clean the damaged spindle. This will remove any dirt or debris that could be hindering its normal function. The spindle can be replaced or repaired. If it is being replaced the technician can take the dowel that is similar in size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.
If the damaged spindle is beyond repair, it may be necessary to replace it completely. Home centers offer generic replacements. However, If the style of your window is rare then it is necessary to find a woodworker or cabinet maker who can duplicate the exact model for you. After the spindle is installed, it can be connected to the handle. The screw holes on the handle with the screws that are already in the frame. Once the new handle is firmly in place, you'll be able to operate your uPVC window.