Ten Things You Shouldnt Post On Twitter

How to Repair Double Glazed Windows
There are a few distinct indicators that indicate that your double-glazed windows need repair. Water ingress and draughts are clear indications of damage to the frames of your windows. They should be repaired as quickly as possible.
However, misting may be a sign that your window seals need replacing. Replacing the seals will fix the issue and stop condensation, draughts, or leaks.
Broken Panes
One of the most frequent problems with double-glazed windows is broken glass. While double pane windows are less likely to break than single-pane ones However, accidents do occur and you'll need to repair a broken window as soon as is possible.
Get rid of any glass fragments that may still be in the frame. Don't forget to wear a pair of gloves and eye protection when doing this, as glass can be sharp. Examine the floor for loose pieces once the shards have been removed. It's also a good idea for you to remove any metal hooks holding the panes together.
Once the glass has been removed, you'll need to remove the old glazing compound (small fasteners that hold the glass in the window frame), and replace them with new ones. It is a long process that requires a few tools. You will require latex glazing putty, pliers, glazing points, pliers a heatgun and a putty blade.
It is recommended to begin at the top and work your way downwards in removing the old points and glazing compound. This will ensure that you don't end up getting any of the sash's wood or paint stuck to the tool. If you do remove some of the sash's wood, ensure that you employ a chisel or a utility knife instead of a chemical stripper since this could cause damage.
Finally, when you're finished ensure that you sand any bare wood to smooth it. When the wood is smooth then you can seal it with linseed or clear wood sealer. This will shield it from water and further damage.
double glazing repairs can use a few simple solutions to repair cracked double pane windows. However, these methods are not a solution to repair the damage and should only be used as a temporary solution. The use of a silicone caulk may aid in sealing the gap, but you need to make sure that you choose a high-quality caulk and adhere to the correct application methods.
Condensation
If you've noticed any moisture or mist between the glass panes of your double-glazed windows, it's a sign that one of your windows has a broken seal. This could be a problem because it prevents the insulating air or gas from getting trapped between the two panes of glass which means it cannot do its job correctly and this will lead to temperature changes that result in condensation forming.
A double glazing expert can easily fix this issue. To fix the problem, your window contractor will take out the affected window sash as well as the IGU (insulating glass unit) before blowing into a new gasket to create a sturdy and airtight seal that will stop condensation from happening again. They will also employ a drying agent to aid in drying the area out and prevent the condensation from happening again.
There may be a the glass panes are a little cloudy in double-glazed windows when the frame has changed position over time. This could crack the seal. This can be a serious issue as windows that are not functioning properly and lose their energy efficiency.
It is possible to replace a double-glazed window's panes however, it can be costly and is usually only required if the window is beyond repair. If you're experiencing problems with your double-glazed window but are still within the warranty period then you may be able to repair it for free or at an affordable cost.
It is worth checking the conditions of your warranty prior to you contact the company to determine whether they can resolve the issue without having to replace the entire window. Double-glazed windows are usually covered by warranties ranging from 10 to 20 years, which means you might find that they can repair the defective window units instead of replacing them completely. If this is the case they'll likely send a professional to fix your double-glazed windows. They're able to complete the task quickly. This is a much less expensive alternative to purchasing and installing new double-glazed windows. It's also better on the environment!
Broken Locks & Handles
When your window handle is damaged or difficult to open, it can be a major problem as it hinders you from using your windows. This can also give burglars an opportunity to break into your house. There are several solutions to this problem, but the best option is to speak with a uPVC professional. They will be able to fix the issue for you, or at the very least offer you a new handle.
There are many different kinds of window locks, but the most common is the Maco or Mila lock, which can be found on the majority uPVC frames. These locks use bayonet style rods to lock, and they are very easy to seize up. If this occurs, the handle's nase is stuck in the out position and cannot be returned to the locked wedge. This could be a frustrating problem, but can be fixed by following a few simple steps.
To fix the problem to fix the issue, you'll need to first take off the handle, which is easy enough using a screwdriver. Once double glazing repairs is removed, you'll be able to see the screws holding the lock to the frame. After the screws have been removed, you can attempt to grab the bolts with the help of a wrench or a pair pliers. If this doesn't work then you might need to insert the tool through the gap between the window and frame (the gap can be different on each end of the window) and then make an "u" shape with your hand to try and grab the shoot bolts.
If you manage to remove the bolts that shoot, then you can close your window by adjusting the handle to the closed position. But it won't be able to be able to open again using the handle, since the gearbox (espag or espagnolette) is likely to be damaged. It is possible to refit the gearbox without the shoot bolts so the window can be opened using the handle (and it will remain secure) however, you'll require a new handle and gearbox.
Broken Hinges
It could be necessary to replace or repair your uPVC windows hinges if they aren't operating properly. It could be that the window was opened too tightly, or that the hinge snapped. Or, they may have a problem. It's easy to repair the hinge so you don't have to purchase new windows.
First, you'll need remove the hinges currently installed. To do this, remove the screws that hold the frame to the hinges. After you've removed your hinges, you can replace them with plywood boards that are cut to the right size. The plywood should be thicker than the original to support the weight of the window when it is closed and opened. Use wood filler to make sure the hole left by the hinge of the past does not leak or loosen.
Once you've replaced the hinges and filled in the holes, you'll have to paint them. Make sure to use a high-quality paint to ensure that it lasts as long as is possible. After the paint has dried it is possible to reattach the window and tighten any loose screws.
Window hinges also require regular maintenance. You can make them last longer by regularly cleaning the friction stay tracks and lubricating the hinge mechanism. You can also apply a wood preservative to shield them from the elements, which will help to keep them from rust and keep them looking great for as long as is possible.
Double-glazed windows can help you save money on heating costs, since it's more energy efficient than windows with only one glass. However, like any other aspect of your home, windows are susceptible to wear and tear and may require repair or replacement as time passes. Our Preston experts can help you if you observe any signs that your double-glazed windows aren't functioning properly.