Fitting a Cat Flap

glass cat flap installation near me of installing a cat flap may seem intimidating however it's actually quite simple with the right instructions. Firstly, determine how back door with cat flap fitted want the cat flap to be (on average the belly height). Mark this point on your door and then use the included template to help you drill.
If you have a young kitten, prop the door open a bit and gradually encourage it to pass through. Reward the kitten every time it moves through.
Measure the Door
A cat flap is a great method to let your pet leave and come inside and out of your home as it pleases. This can help with keeping your cat in good health by ensuring that it is exercising and also being able to go back inside if trapped outside in bad weather, especially during the winter. It also can reduce the amount of time you have to spend letting it out or in. It can also ensure your home is secure by allowing you to be aware of when it went out.
It is crucial that the flap on your cat is properly fitted to stop your pet from escaping through it or be pushed through by other animals (e.g. dogs). It is important to measure the height of your pet's stomach and the height of the doorway in your home to make sure the flap is at the correct height. You can alter the height of your flap when your cat is smaller or taller than average.
Next, use a spirit-level to mark the center of the door. This is where you will put in the flap. Then, using the markings as a guideline, cut out the contour of your flap with the help of a jigsaw. After you've cut the area, sand down the edges to create smooth surfaces. Drill any necessary holes.
Installing a cat flap ought to not take more than two hours. However, the process can be a bit more difficult in the event that you have to put it into the door of a uPVC or composite door because these doors come in an array of thicknesses, which affect how the holes are cut and the type of door they are fixed into. We recommend that you call an expert if this is your first time working with glass.
Measure Your Cat
You will not have to spend hours of ignoring the pet meow to be let in or out. This is especially useful for cats that are inside in all weathers when you are at work.
If you are planning to install a cat flap in your door, it is crucial to measure your cat before attempting the task. Although it might appear to be to be a simple task, it is important to make sure you measure correctly or your cat will find it very difficult to use.
First, ensure that your cat is relaxed and not stressed prior to taking the measurements. You'll need to keep them in a manner that they cannot move and also make sure that the ruler or measuring tape is flat against their body, not bending in any place. Keeping the ruler or measuring tape against their body from their head to the bottom of their tail can allow you to determine an exact measurement.
Once you've determined your cat's measurement then you can look at the door to determine where to place the flap. Position the flap at the level of your cat's belly. This will allow them to pass through the door without much effort. This will also prevent the flap from making quite a lot of noise when it opens and closes.
You must consider the thickness of the uPVC or composite door as well. Although timber doors are of a similar thickness, uPVC and composite doors may differ in their overall structure and this can make the installation of a cat flap more complicated since you have to ensure that the hole you make is the proper size for your pet.
It is also worth studying the instructions included with the kit to locate an outline of the template that can be used to mark the position of the hole in the door. This will enable you to determine where the hole needs to be located and ensure that the template is positioned precisely on the door. It is also beneficial to use a spirit-level to ensure that the template is perfectly against the door.
Cut the Flap
You will need to cut an opening in the door to accommodate your cat flap prior to you can attach it. This can be a challenging job, and it is recommended to seek the help of a professional cat flap fitter for this job in case you don't have the expertise or knowledge to complete the task yourself. It is also recommended to review the directions that come with the cat flap kit to learn how to do it correctly.
To do this you need to measure the height of your cat or kitten's belly and use that as an indicator point. A good guideline is to set the cat flap about 10-15 centimeters away from the ground since this is the typical belly height for cats. Your cat will be able to move through the flap without difficulty and will also make the other cats or neighbours who are snooping an issue when trying to get in or out.
Once you've decided the location where the cat flap needs to be placed, mark this location on the door using pencil. If your kit has a template put it on top of the door. Use the marks on the template to drill holes in each corner. Then, you'll be able cut out the template and replace it with the flap for cats.
If you are installing your cat flap on a door made from wood or uPVC, it is possible to do it yourself if you are confident enough to use the Jigsaw. Be sure to not cut into any of the door mullions or vertical rails. You can use a jigsaw cut the panel into a square or a circle according to the design of your cat flap. Make sure to take your time and don't try to force the jigsaw into cutting faster.
After the hole has been cut, carefully place the cat flap in its new place of residence. Make sure it's solidly secured. If it features caps on the screws, then place these caps onto the screws that protrude. After the screws are installed, sand the rough edges and then apply sealant to any gaps. This will block drafts from entering your home.
Install the Flap
If you have an ordinary cat flap, you can try to encourage your pet through it by placing a small amount cat food on the front of the door. you could look here can also push the cat using the help of a stick or your hands. Once your cat is accustomed to walking through the flap, it should be able to go into and out as it wants, so you can let it out or in without holding the door open for it all day (and potentially in all weather conditions).
It is possible to put a cat flap in the UPVC doors or glass door, but it might not be as simple as installing one inside a wooden exterior door. This is due to the fact that the UPVC doors and certain types of glass doors don't have an even thickness. This could have a dramatic effect on how you cut the hole for the flap and will also affect whether the flap is fitted correctly after it has installed.
The mounting kit might include a template that shows you the best places to drill holes. If the kit does not include an example you can use a photocopier to make your own. When cutting, it's important to keep the jigsaw from being pushed too far enough to make a larger hole than you need in your door.
Certain cat flaps come in circular shapes, which can be more difficult to install. If you have a circular flap it's essential to make sure the hole is in the correct position on your door, because if it's not, the cat will not be able to use the flap and may be stuck in the open all day (or even night).
Some cat flaps come with locks that let you manage when your cat comes in and goes. These are very helpful when you're worried about your cat going out at night and then coming back in due to the darkness, or you're working all day. Certain locks can be used to lock entrance or exit, while others can be locked both ways. This is helpful for sick or older cats who don't want to go outside in bad weather.