15 Surprising Facts About Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism become faulty? Perhaps the handles on your uPVC windows and doors are not aligned properly or are difficult to use.
It's important that your double glazed doors operate smoothly, otherwise you will lose energy and increase the chances of burglary. Owen the Locksmith will be able to repair your door lock for a reasonable cost.
Snapped Key
If a key breaks in a lock, it can be incredibly annoying. It could also be an issue for security, since the door may not be locked and make you vulnerable to intruders. Fortunately, there are quick fixes that you can use to solve the problem and get your door functioning properly once more.
First, remember to stay calm. If you panic and begin playing around with your keys you may end up pushing the damaged piece of the key further into the lock, making the situation even more difficult.
Next spray WD-40 or a different penetrating oil into the lock to aid in making the broken piece slip out more easily. You can also use a screwdriver to help break up any stuck pieces that could be hindering the flow. If you're lucky enough to have a bit of the key hanging out, you can use a paperclip or some other metal object with a thin surface to grab it and pull it out. Both methods work, but you must be careful not to push the damaged key piece further into the keyway.
Some paperclips have grooved edges that could work in a pinch to extract hooks, and some Jigsaw blades also work for this use. If you don't have any of these handy, you can make use of needle-nose pliers that bend to create a hook. Finally, a pair of tweezers is a good way to grip and pull out the last piece of the key that was broken.
If you can't get the broken piece of key out, try using a lock de-icer. This is usually available at all hardware stores. It is used to freeze any water or ice that could be in the lock.
If none of these methods seem to be helping, it might be the time to contact locksmith. The experts at Fitlocks can quickly solve problems like broken handles and snapped keys with uPVC locks and door mechanisms. They can also alter your double glazing door mechanisms to make them easier to operate. Book a double glazing repair with us online or give us a call to discuss your requirements.
Broken Cylinder
A broken cylinder can pose a major security risk. It's fortunately a simple repair for a professional locksmith to complete. A locksmith will have to tap the cylinder to repair it. They can do this with a hammer or other tools, but the most effective method is to make use of a long match or piece of wire. Then, put the end of the match or wire in the keyway. After that, the locksmith can hit the lock to break it open. This is much better than using a hammer that can damage the lock.
The most frequent cause of cracks in the head of a cylinder is due to overheating. This can occur when the cylinder block and cylinder head are made from different metals, like cast iron and aluminium. When various metals heat up and cool down at different rates, it can create hotspots locally that expand faster than the rest of the cylinder head, thus leading to cracks.
Corrosion is a different reason for fractures in cylinders. If the head and block of the cylinder are not maintained properly, they can corrosion or rust and cause them to expand more than anticipated. This can cause cracks in the future.
If your uPVC window lock or door is brittle or requires a lot of pressure to turn, it can be the result of a number of things. This can be caused by a faulty locking mechanism, or misalignment and also a worn out handle.
Fortunately it's a simple and affordable fix for the majority of homeowners with double glazing. A professional locksmith will usually be able to resolve this issue within a matter of hours of arriving at your property. Depending on your needs they will be able to replace the locking mechanism, change the window handles, and also change the gearboxes. A professional locksmith will always be able to advise you on the most cost-effective solution for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders that provide an additional layer of protection from burglars. This is a small price to pay for the security that comes from knowing that your uPVC doors are secure.
Broken Handle
It's not surprising that window handle locks may break. They have intricate mechanisms that become less effective over time. If yours is damaged, it can be difficult to pinpoint the cause of the issue and make sure you fix it properly.
If the issue is with the internal locking mechanism or the latch, repairing your broken handle will increase your uPVC double glazing door's security as well as help you stop draughts. When you aren't doing it right, replacing or repairing your handle can be expensive and can harm the door's frame as well as lock and frame, so it's worth spending some time to make sure you do it right.
Screwdriver Open the window remove the screw that holds the handle. This should be located on the inside face of the back plate, which is usually hidden by an aesthetically pleasing cover for the screw reasons. Be sure not to lose any internal components within the handle, for example the plates or levers that are on either side of the spindle. Ideally, keep these in the same order so you can replace them in the event of a need.
Then, rotate the handle so it's at 90 degrees to the window frame and loosen the screw at the back of the handle that fixes it to the internal spindle by using a second screwdriver. Once this is loose, you should be able to pull the handle off and take off the damaged spindle. Replace it with a new one, making sure that it's the same size as the previous one (you can typically find these on the internet or at hardware stores) and screw it securely in the right place. Do not overtighten the screw as this can damage the handle and the window frame.
Ensure the new handle is correctly installed Close the window and test the handle. It should work smoothly and you'll be able open your window once again.
Make sure to check that your uPVC window is closing properly when you're using the handle. If they're not closing correctly, you could encounter damp or draughts inside your home. You could also compromise the energy efficiency of your home. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames so they are able to shut properly.
Broken Spindle
It is usually the case that the spindle within the handle breaks, rather than the handle itself. This is particularly typical in uPVC tilt and turn windows. These windows require a handle that acts as a locking device in the frame of the window. The handle is connected to a rod in the centre that in turn activates cams that resemble mushrooms, which lock into window frame keeps. If the dead latch mechanism is not able to open when the handle is turned, it is possible that the spindle has been damaged This can be a frustrating problem.
There are solutions to this problem. check out the post right here can quickly and effectively fix the issue. They will be able to remove the window handle using a tool that can remove the wheel part of the mechanism, where the spindle goes. This is done without damage to the handle or the window frame.
After removing the wheel, the technician can examine the spindle and identify the reason for its break. This involves breaking down the spindle into its individual parts and carefully recording their general condition as in addition to any specific areas of wear or damage. This process is typically performed in a clean room by highly skilled technicians.
The next step is to clean the damaged spindle, this will remove any dirt or other debris that could be hindering its normal operation. After this the spindle can be repaired or replaced. If the technician is replacing the spindle he can use a dowel that is comparable in size to the original. Then, he will drill matching holes into both pieces. This will ensure that the spindle will fit perfectly with the handle.
If the spindle is damaged and cannot be repaired it may require replacement completely. Home centers can sell generic replacements but if the window design is unique you'll need to contact a cabinet maker or woodworker who can recreate the exact component. Once the new spindle is in place it can be fitted to the handle by line up the holes for screws in the handle and the frame existing screws. Once the new handle is seated you will be ready to operate your uPVC window.