15 Secretly Funny People Working In Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.
It is crucial to wash and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and improve energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause significant damage to your home and may even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.
Single-pane windows are relatively easy to replace and typically fit into frames that were previously in use very easily. However when you have double-pane windows that are secured by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this situation you'll need locate some plastic spacers that will help the new pane to fit properly into the frame of the window.
Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.
After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from entering the property until a professional can come out and repair the window. This will also provide a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is large, you might need to consider security screens that includes an opening. This will give you the best of both.
2. Sagging
Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of problems including sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. It's important to take action as soon as you discover that your uPVC windows are sliding.
Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll need open the window so that you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit, tighten the screws until they stay in place.
If you are unable to reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and safe from drafts.
uPVC handles can also loosen up. This is usually due to screws that have been removed over time, but it could be caused by the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and perform a test fit. The corner joints of the sash need to be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then turn the mechanism to position.
3. Water Leaks
It is essential to take action if get up each morning to find mouldy walls and wet floors. Windows that leak water do are not just a cause for degradation of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
This is a relatively easy fix that can be done by any DIY expert. Depending on how severe the problem is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.
It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.
Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.
If the leakage is occurring between the double-glazed window, it is more likely the issue is related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and open in a breeze It could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.
Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It is very easy to replace a hinge on a window but it's much simpler if you have someone to help you to hold the frame.
Make sure that the uPVC hinges are open and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.
Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or due to improper installation in the factory. Sending us a picture through our website can often solve the issue. Source are happy to give advice.
Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.
5. Draughts
Draughts in windows made of upvc can be caused by various factors. The hinges, also due to wear and tear could become misaligned. This will cause an opening to appear between the sash and the frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it could be necessary to have them re-aligned or replaced. The interlock, which is located on the hinge side of the window and can also be misaligned, and again it's possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.
The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and lessen the risk of draughts.
Another method of reducing draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!
Your windows made of upvc will remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come the point when it's more economical to replace them than repair them. If you are having issues with your upvc windows, it's recommended to seek help from a professional as soon as possible.