Do Not Make This Blunder On Your Window Repair

Window Repairs
Window repairs can help homeowners save money and help keep their homes comfortable. In the event of major damage, such as broken glass or a damaged frame, a replacement window may be required.
Many other issues can be fixed to extend the longevity of windows. Some common issues include:
Broken or cracked Panes
Glass that is cracked can be caused by a lawnmowers that throws rocks at the wrong time or the blow of a tree branch by strong winds. This is not only visually bad, but it can cause higher energy bills as the broken pieces let cold air in to your home. It's fairly simple to repair windows that have broken panes.
Begin by carefully removing the glass with gloves and safety sunglasses. You may need use a utility knife to loosen old glazing compound or putty around the frame's edges. Then, use a gentle paper towel or cloth to wipe the surface of the glass and the wood of the frame.
Once the frame is clean, apply a waterproof silicone caulking around the perimeter of the frame. This will stop water from getting into the frame through the cracks and result in further damage.
If you have double-pane glass cracks that are not treated properly could weaken the gas layer that lies between the panes and make your windows less insulative. If the crack is so extensive that it compromises the strength of the window, or if the pane inside is not there, you may need to contact an expert.
window repairs may also occur when there's a significant temperature difference both inside and outside your home. The glass is then able to expand and shrink. If the cracks are on two sides of a window it is best to replace it rather than try to repair it.
For cracked windows that aren't yet ready to be replaced clear tape can do a good job of securing the crack and keeping out bugs and cold air. You can cut an area of nylon stocking or tarp large enough to cover the crack, and fix it with duct tape. This isn't an end-to-end fix, but it will keep cold air out and insects away from your home. If you notice cracks or blemishes on your older windows, you should check with the local company to determine whether replacing the entire window is a better solution.
Rotten Wood
Wood rot is one of the most frequent issues with windows. It can alter the appearance of a house and it can also pose a safety risk. However, it is possible to repair rotted wood. The first step is to ensure that the cause of the rot has been taken care of. This can be accomplished by examining for leaks in the roof, missing gutters cracking caulking, and any other areas which allow water to penetrate the wood.
You'll then have to remove the rotten parts of the window frame. This can be done with a claw hammer, chisel or a rasp. After the areas that are rotten have been removed it is time to replace them with fresh wood. Pre-treated wood is suggested for this project, as it is resistant to rot. If you are not able to replace the wood damaged by rot, you can try using filler or wood hardener to strengthen the damaged area. This kind of product can be found in a lot of hardware stores. To achieve the best results, follow the instructions on the label.
Once you have replaced the rotten areas of the windowsill, it's essential to protect the newly-repaired area. This can be done by applying a waterproof wood sealant. Sikkens for instance, is a great product to use.
It is also possible to use an epoxy filler that is two-part to shield the wood from further damage. It is easy to apply and leaves a beautiful finish. However, it is very important to follow the application instructions on the label. Once the epoxy filler has dried, you are able to sand the wood's surface. Start with a rough sandpaper, and then move on to a smoother grade.
You do not want to expose the damaged part to further moisture. It is a good idea, therefore, to protect the surface you have repaired with an oil-based primer which will shield it from moisture. After that, you can reapply the wood sealant, which is waterproof.
It won't open
There are many reasons why windows don't open. The house could have settled or the wooden frames might have warped due to humid weather. Someone might have also nailed them shut for security. However, with a little patience and the right tools, many windows that are locked can be opened.
One of the most frequent causes of windows that won't open is accumulated debris or gunk on its moving parts. Dirt and grime build up on sliding tracks, hinges, and locks over time, according to Acme Glass. Additionally, metal hardware can get rusty when in contact with humidity or direct sunlight. Maintaining these areas lubricated by spray grease will help prevent oxidation and keep your window operating properly.
Stuck windows could be caused by the breaking or loosening of the pulleys used to raise and lower the window. These components can be weakened and obstructed when they are placed at least two floors above surface.
If you have difficulty opening a door, use a pry-bar to gently open the window. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Alternatively, try running a hair dryer along the edges of the frame for a few minutes to warm the wood and assist it move more easily.
Another common problem with windows that don't open is a broken spring that keeps the window jamb from lowering or rising. Depending on who manufactured the windows, you'll need to refer to your owner's manual for further instructions.
If you have tried cleaning the moving parts of your windows and then lubricating them but they're still not opening, it might be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows go from functional to useless, as windows that aren't properly shut can leave your home vulnerable to water damage and burglary. Contact our team for more information on our windows replacement services and products today!