10 Misconceptions Your Boss Shares Regarding Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.
Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.
1. Broken Glass
If the glass in your window is broken it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good shape.
Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need locate some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.
If you are going to attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall onto the cloth instead of onto the floor where they could be trampled on and cause further damage.
It's a good idea to tape the gap once the glass is removed. This will keep water and drafts from entering your home until a professional is able to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the distance between the window and the door is large, you might need to consider security screens that has a window. This will provide the best of both.
2. Sagging
uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. As time passes, they may be affected by a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act when you discover that your uPVC windows are sagging.
To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you're satisfied with the fit, you can tighten the screws to ensure they remain in the right place.
If you are unable to reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.
uPVC handles can also loosen up. Often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and then perform an initial fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.
3. Water Leaks
It is crucial to take action if you awake each day to discover mouldy walls and wet floors. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. When it comes to uPVC repair, you should avoid over-caulking. This can make your window harder to clean and reduce its energy efficiency.
It is important to check that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more extreme cases, you may need to replace the window.
Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.
If the leakage occurs between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or slack and open with ease It could be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.
Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It is very easy to replace a hinge on a window but it's much easier if someone else helps hold the frame.
Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.
The issue can be caused either by opening the window improperly or a faulty installation at the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you suggestions.
It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. window repairs can also stop corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.
5. window repairs in upvc windows can be caused by a few different factors. The hinges may also become misaligned due to wear, creating an opening where the sash and frame meet. They can be fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to have them re-aligned or replaced. In addition, the interlock could also become unbalanced. This happens on the hinge side and might require to be cleaned. In some cases it might be necessary to replace these.
The second most frequent reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures, and reduce the risk of draughts.
One of the most effective ways to cut down on draughts is by using a draught excluder. These are typically made of fabric filled with some sort of filler and can be positioned on the windowsill on top. They will help keep cold air out and keep your home warm and cosy!
With window repairs and repair, your upvc windows will provide excellent security and insulation for your home. It is important to remember that all windows eventually get worn out and it is cheaper to replace them than to repair them. If you have any problems with your upvc window you should consult a professional as soon as possible.