10 Undisputed Reasons People Hate Double Glazing Lock Repairs

Double Glazing Lock Repairs
Good locks on your doors and windows will help prevent burglars from getting into your home. Generally, they don't like breaking glass or squeezing through open windows.
However, some double glazing owners have experienced issues with their door lock or window lock after it's been installed. These issues can usually be resolved without the need for new double glazing.
Broken or faulty locks
A locksmith can repair your uPVC window or door lock if damaged or broken. They will be able to repair the striker plates, hinges and locks on your double-glazed. They will also be able to move the cylinder around to fix any misalignment problems that may be causing your handle to not operate properly.
If the key fits in the lock, but it doesn't turn or is difficult to insert, the mechanism could be stuck. Dirt or grease can get stuck in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, such as graphite or teflon and not oil, as oil can attract dirt, and cause it to stick to the inside mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant must get into the mechanism, and the lock should spin easily.
A damaged lock can be caused by loose screws within the lock mechanism. They can loosen and fall out or even break off completely, preventing the lock from being able to work properly. A screwdriver can be used to tighten the screws but care must be taken not to tighten them too much, because this could cause damage to internal components.
A broken lock can be dangerous for you and your family members, especially if you have small children. It can be easy for them to open the door without you knowing, and this can give them access to your home. If you're worried that this could happen, a vetted professional locksmith can assist you secure the double-glazed doors.
Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and damaged mechanisms on uPVC doors and windows. We can also reconfigure your uPVC or double glazing locking system to meet your particular needs, which means that in many cases replacement windows and doors are not necessary.
Handles that are broken or damaged
As part of their overall security package many double-glazed windows come with a multipoint lock. This is a great choice for those who are concerned about opportunistic burglars trying to gain entry to their home. It is also a good idea to ask your installer about anti-lift locks, these can be fitted in addition to the existing locks and will keep your window locked in a closed position.
Handle locks are often damaged or fail. They are the first part that criminals employ to open your window. The good news is that this is one of easiest parts to fix.
Modern uPVC and aluminium handles feature a multi-point locking system known as Espagnolette which is designed to resist forced entry. This security upgrade is offered as an option for new uPVC windows. As an alternative upgrade, older style handles made of aluminium or uPVC that are no longer in use can be upgraded to a shoot bolt locking system.
If a handle is defective, it is essential to get the handle repaired as quickly as you can. The damaged handles could stop the window from closing properly and permit drafts to get in. It could also be a vulnerability that opportunistic thieves could take advantage of and put the belongings of your family and your own at risk.
To repair the damaged mechanism, first access the window frame and then remove the damaged handle. double glazing repair that opens the handle is then accessed and the type identified so that a replacement can be sourced which matches the profile of the internal window frame mechanisms.
After the mechanism has been replaced, the handle may be returned to the original screws. However, we suggest replacing them with longer screws as they will provide a more secure fit. The final step is to seal the handle using an opaque sealant. This will shield it from further corrosion. After you've completed this step your window will be fully functional again at a fraction the cost of replacing it.
Hinges that are broken or faulty
If your windows don't shut properly, you could suffer from draughts or a weakening of your home's security, and an increased risk of water or damp damage. Broken or damaged window hinges are a typical problem that can be fixed easily.
If your uPVC windows won't close or open it's likely that the hinges need to be repaired or replaced. Many window companies will require you to buy an entirely new window unit in order to address this problem, but we can replace the hinges to save you money.
Window hinges are often damaged by repeated use or weakening over time due to corrosion. If you've broken a window hinge, it's crucial to take the necessary precautions to prevent further damage. This includes not forcing the window to open or close.
You can find the correct parts for your hinge by identifying its model. Common types of window hinges include Maco, Mila, Roto and other brands. It is recommended to speak with an expert in this regard to ensure that you don't make the mistake of buying parts that aren't compatible with your current hardware and could cause further damage.
Faulty hinges can be a major issue for your uPVC window and doors. They can be a major source of noise and can also allow water infiltration which can damage your windows.
Check that the pin barrels on both hinge halves are aligned. If not tapping the headpin, use the hammer to create a slight bend in the hinge barrel. This will help to keep the pin in place. Ask a friend to hold the doors while you take out hinge screws and hinges. Replace the hinges with ones that are the same size and then attach the screws using glue. After the glue is drying, secure the hinges with clamps or weights.
Once your hinges are repaired and repaired, you should be able to install the door and then reattach the handle. It is recommended to replace the screws with the same length of dowels as the screw that was originally used so that they are in line with each other.
Glass that is Broken or damaged
While uPVC windows do an excellent job of keeping cold out and heat in, they can become damaged over time. This can be the case with broken or damaged glass as well as defective locks. This is an issue that can be costly should it be not addressed. This can also detract from the aesthetics of your home and result in a decrease in insulation. It is important to repair any damage promptly.
You can fix your cracked glass yourself if you have the proper tools and techniques. First, make sure that the surrounding area around the glass is free of debris to ensure that any shards do not injure anyone and aren't a trip hazard. Then, take any pieces of broken glass and dispose of them appropriately. Then, place masking tape to the entire area to prevent shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane prior to gluing it in place is an ideal option when you have windows with two panes. This will ensure that you have enough space to finish your project.
Use a clean, dry cloth to clean the glass's surface and the frame before applying the glue. Follow the curing and application directions, which may vary from product to product. You may need to clamp the broken glass with clamps made of lightweight materials designed to hold delicate materials, depending on the angle.
When the adhesive has completely set, carefully place the glass inside the window frame, ensuring it's flush with the edge of the frame, and there aren't any gaps between the glass and the window sash. Avoid flexing the glass as you install it again because this could weaken the seal. This could lead to condensation or water infiltration.
Contact a professional glazier such as O'Brien(r) to arrange an appointment to replace your glass if the window has been completely broken. Unattended handling of broken glass can be a risk to pet and children It's therefore essential to act swiftly.