20 Best Tweets Of All Time About Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs
Is your uPVC window or door mechanism faulty? Perhaps the door or window handles don't meet up correctly or are difficult to use.
It is crucial that the double glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can repair your door lock for a reasonable cost.
Snapped Key
If a key breaks inside a lock, it can be incredibly annoying. It could also be a security risk in that it can make you vulnerable to an intruder if the door is not locked. There are a few quick solutions you can use to fix the problem and make your door functional again.
Be sure to remain calm. If you get scared and start doing a lot of fumbling around, you might just end up pushing the damaged piece of the key even further into the lock, making the situation much worse.
Spray WD-40 or another penetrating oil, into the lock. This will help the broken piece to be removed more easily. You can also use a screwdriver to break off any pieces that are stuck. If you have a chunk of the key still sticking out and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods work, but be careful not to push the broken key further into the keyway.
Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades also work well for this. If you don't have any of these handy, you can use needle-nose pliers to bend them and create a hook. You can also make use of a pair of tweezers to grab and remove the last bit of the broken keys.
If you cannot remove the broken key piece then you can use a lock deicer. It's usually available at all hardware stores, and it works by freezing any moisture or ice that may be in the lock.
If none of these solutions seem to work, it might be time to call a locksmith. Fitlocks experts can quickly solve problems with uPVC door mechanisms and locks such as snapped keys and broken handles. They can also reconfigure double glazing door mechanisms so that they are simpler to operate. Get a double glazing repair via our website, or give us a call to discuss your needs.
Broken Cylinder
A damaged cylinder can pose an immediate security risk. It's a good thing that it's a simple repair for professional locksmiths to complete. To fix the cylinder, a locksmith will need to tap it. This can be accomplished with the hammer or other tool. However, the best method is to employ a wire or long match. Place double glazing repairs or wire's end in the keyway. The locksmith can then strike the lock to break it. This is far better than using a hammer that can cause damage to the lock.
Overheating is the most common cause of cylinder heads cracking. This can occur when the cylinder block and cylinder head are made of different metals, like cast iron and aluminum. When the different metals heat up and cool down at different rates, it may create hotspots in the local area that expand faster than the rest of the cylinder head, thus leading to cracks.
Another reason that could cause cracks in the cylinder is corrosion. If the head and block of a cylinder are not maintained in a timely manner they could be corroded or rust, which can cause them to expand more than they would normally. This could lead to cracks over time.
If your uPVC window or door lock is stiff and requires a lot of pressure to turn, it could be due to a variety reasons. This issue could be caused by a faulty locking mechanism or misalignment, and also a worn out handle.
Fortunately, this is an easy and inexpensive fix for most homeowners of double glazing. A professional locksmith will typically be able to resolve the issue within an hour of arriving at your home. Depending on your needs, they can replace the locking mechanism, replace the window handles, and also change the gearboxes. A professional locksmith will always be able to advise you on the most cost-effective solutions for your home. They can even suggest upgrades to the highest-security 3 Star euro cylinders TS007 that provide an extra layer of security against burglars. It's a small amount to pay for the peace-of-mind that comes from knowing that your uPVC door is secured.
Broken Handle
It's not surprising that window handle locks could break. They have intricate mechanisms that become less effective over time. If yours fails it's difficult to determine the source of the issue. Make sure that you repair it correctly.
Fixing your broken handle, whether it's the internal locking mechanism or latch can increase the security of your uPVC door and prevent draughts. Incorrectly repairing or replacing the handle could be costly and may damage the door's frame and lock, so it's worth taking some time to do it right.
With the window in the open position then loosen the screw that secures the handle using a screwdriver. The screw should be on the inside of the backplate, which is usually hidden by a screw cap for aesthetic purposes. You should not be able to replace any internal parts of the handle such as the levers and plates on either side. Keep them in the same order so that it is easier to replace if necessary.
Next, turn the handle to make it 90 degrees towards the window frame. Then, loosen the screw at the back of the handle which holds it to the internal spindle by using another screwdriver. Once the screw is loose, remove the handle and remove the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can buy them on the internet or at hardware stores). Screw it into place. Do not overtighten the screw as this could damage the handle and the window frame.
Make sure the new handle is installed after which you can close and test the handle. Hopefully, it will work smoothly and you'll be able to open your window once more.
Don't forget to double-check that your uPVC window is closing properly when you're working with the handle. If they don't then you may experience draughts and damp in your home, as well as compromising your home's energy efficiency. A local window company, like Core Sash Windows, will be capable of adjusting the hinges on your window frames so they shut correctly.
Broken Spindle
It is often the case that the spindle in the handle is broken, not the handle itself. This is especially common in uPVC tilt and turn windows. These windows require a handle that is a lock mechanism that is located in the window frame. The handle is attached to a central rod which activates mushroom-shaped locking cams that secure into the frame of the window keep. If the dead latch mechanism does not open when the handle is turned, it is possible that the spindle has broken This can be a frustrating problem.
Fortunately there are steps that can be taken to remedy this situation. A good locksmith can quickly and effectively address this problem. They will be able to remove the window handle using a tool to remove the wheel component of the mechanism that is where the spindle goes. This can be done without damage to the handle or the window frame.
After removing the wheel the technician can examine the spindle and identify the cause of the break. This involves disassembling the spindle, and then examining every component, observing any wear or damage. The process is carried out in a clean, well-lit room by skilled technicians.
The next step is to clean the damaged spindle. This helps eliminate any debris or dirt that might be obstructing its normal function. The spindle can then be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is comparable in size to the original. He will then drill matching holes into both pieces. This will ensure that the spindle will fit perfectly with the handle.
If the damaged spindle can't be repaired, it could require replacement completely. Home centers sell generic replacements, but if your window design is unusual you'll have to speak with an expert in woodworking or cabinet making who can replicate the exact component. Once the spindle has been installed, it can be fixed to the handle. Line up the screw holes on the handle with the screws that are already in the frame. Once the new handle is in place, you'll be able to operate your uPVC window.