20 Trailblazers Leading The Way In Automotive Key Repair

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition
We've all been there: your car keys won't turn on the ignition. It happens at the most inconvenient times, like when you're filling up your trunk with groceries or when you're returning to home from work.
There are many solutions that will help you get back on your way. Here are a few common car key repair issues and solutions for them:
Broken or bent keys
A bent key is the most frequent reason why a car owner is unable to start their car. Straightening the key is a simple fix. It may appear simple, but you must be cautious. The key is thin and can break if you bend it even a little.
To do this, you will need an area with a solid foundation, as well as a pair of pliers. Grab the key at the other end using the pliers, and bend it until it is straight. This can be done on a flat surface or in a vise. Then, you can put it into the lock to see if it turns.
If not, you might need to have a new one made. This will avoid having to contact a locksmith and will ensure that your key works.
Keep a spare key in your pocket to ensure you're not left without access to your vehicle in the event that your key breaks.
If you have trouble inserting a broken or bent lock key, try applying some grease to it. This will allow it to move through the cylinder, and will prevent it from getting stuck. Spray graphite or lubricant. If you are using a spray, be sure to attach the plastic tubing that came with it to ensure more precise application. This will also help to keep moisture from damaging your key.
Pins that are snuck or springs
A pin (also known as a roll pin or spring) can get stuck. A pin is a small piece of metal that measures between 5.1 and 7.6 cm (2.5-3.0 in) long and has hollow ends. It is used to connect two components of an equipment. In most cases, you can remove pins by simply pulling it out with your fingers or using a wrench.
If you own an older vehicle that has microchip keys it is likely that the key will need to be programmed to work with your vehicle. This procedure can be easy or difficult depending on the car's model and manufacturer.
If you require assistance with your keys for your vehicle or locks give us a call! We can repair, replace or program almost every vehicle key.
Gear Selector
It's important to get your car to a mechanic as soon as you can if the gear selector is stuck in park. This is a safety concern and you could cause serious vehicle damage if you continue driving. This could also be a sign that your transmission is experiencing more serious problems, which are costly to repair.
Most of the time, this problem is easily fixable. Most often, the cable end that is attached to the lever may snap or break off. The mechanic can repair this in a few minutes.
In some instances, however, the gear selector bushing can get damaged or worn out. These are rubber covers that go around articulation points in the gear system, allowing it shift more easily. These covers work similarly to cartilage joints, and therefore need to be flexible and healthy.
It is not uncommon for them to degrade over time, but there are some ways to prolong their life. First, you should stay clear of using the gear selector in very cold temperatures. This is because the cables controlling the gear are often prone to freezing and cracking. You should also replace the bushings using premium quality ones, like the ones from First Line.
These bushings are a critical component of your selection of gears and shouldn't be ignored. If you find that yours is worn out, it's a good idea to go to an auto shop that specializes in Land Rover repairs. how to repair car key lock can help find the right parts to restore your gear selection apparatus. They can also offer various other services, like maintenance and service for your transmission.
Dead battery
If you turn the ignition on but hear nothing but a click, then your battery is dead. As batteries age, they undergo a natural process which causes them to die prematurely. The negative plates of your car battery will start to become coated with sulfate crystals.
A dead battery can also cause you to lose the power source in your car and cause the radio or electric windows to malfunction. If you've had trouble starting your car in cold weather, this could be a sign you require an upgrade to your battery.
Sometimes your problem might not be caused by a dead battery, but rather a problem with the charging system of your vehicle. This issue can be fixed by having your mechanic verify that the alternator, serpentine belt and battery cables are working properly.
Another common repair for a key in the automotive is an ignition key that has stopped working properly. The key fob is a small unit that connects to the computer in the vehicle and relays commands and signals between the engine and the accessory systems. The system could become confused or cease communicating with your vehicle when it is exposed extreme temperatures or is wet.
You can usually reset the lost key fob by following the directions in the owner's guide. Depending on the model of your car, you may need to open and close the doors, turn the lights and other electronic devices on and off, press a certain sequence of buttons, or shut and open the windows. If this doesn't solve your fob, it could require professional programming by an expert technician. It's worth attempting these steps before you decide to shell out for a new device.
Ignition socket
Modern car keys come with an embedded transponder chip in them that transmits signals to a receiver in the ignition when it is inserted. This signal tells an immobilizer that the key is right for the car to start. In the 1990s, theft of vehicles became such an issue that many manufacturers fitted this transponder security system in their vehicles to ensure safety and insurance reasons.
If you own a newer vehicle, the only way to replace your keys could be through the dealership or by calling the manufacturer directly. Write down the VIN (vehicle ID number) of your vehicle before you leave. This number can be found on the dashboard, in the door jamb, or in an owner's guide.
Bring your current key to an AutoZone participating store. An associate will employ a machine which will trace the contours of the blank key in order to precisely replicate the original key. They will then cut the new key using an exact cutting machine on site. If your key is blade-style, a key fob, or has a large grey or black head, it'll need to be programmed to your specific vehicle before it can be used to start the engine.