A Look At The Ugly Truth About Double Glazing Lock Repairs

Double Glazing Lock Repairs
The best locks for your doors and windows will stop burglars from entering your home. They aren't likely to break glass or attempt to get through windows that are open.
However, some double glazing owners have encountered issues with their door or window lock after it's been installed. Fortunately, these issues are usually fixable and don't require to pay for new double glazing.
Broken or damaged locks
A locksmith can repair your uPVC window or door lock if it is broken or faulty. They can fix the hinges, striker plates and locks on your double-glazed. They will also be able to move the cylinder around to fix any misalignment issues which could cause your handle to not operate properly.
If the key fits into the lock but doesn't turn or is difficult to insert the mechanism could be stuck. This can be caused by grime or dirt getting stuck inside the mechanism. If this is the case, it is possible to clean the lock and then lubricate it. Use a dry lubricant such as graphite or teflon, not oil, because oil can attract dirt and cause it to stick to the inside of the mechanism. After you have lubricated the lock, you must insert the key and attempt to turn it. The lubricant should make through the mechanism and the lock should be able to turn without difficulty.
A malfunctioning lock could be caused by loose screws in the mechanism of the lock. They may loosen and fall out, or even break off completely preventing the lock to work properly. These screws can be tightened using a screwdriver, but you must be careful not to overtighten them. This could damage the internal components.
A broken lock can be dangerous for both you and your family members, especially if you have young children. They can open the door without your knowledge, giving them access to your house. If double glazing repairs are worried about this happening, a locksmith who is vetted can provide a quick and efficient service to secure your double-glazed doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing and can repair any type of defective and damaged mechanisms such as handles, cylinders, handles and lock systems for both uPVC windows and doors. We can also modify the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always required.
Handles that are damaged or faulty
As part of their overall security package, most double-glazed windows feature a multipoint lock. This is a great choice for those who are worried about opportunistic burglars trying to gain access to their home. Ask your installer about antilift blocks. These can be installed in addition to existing locks and aid in keeping your windows closed.
It's not uncommon for handles to be damaged or fail. They are the first part of your window that will be pushed open by a criminal intent on breaking into. The good news is that this is one of the most straightforward parts to repair.
Modern uPVC handles as well as aluminium handles come with a multi-point locking mechanism known as Espagnolette that is designed to ward off forced entry. This security upgrade is usually provided as an additional option on new uPVC window installations. As an upgrade option, older style uPVC or aluminium handles that are no longer used can be upgraded to shoot bolt locking systems.
If a handle is damaged, it's crucial to get it repaired as quickly as you can. A damaged handle can stop the window from closing properly and letting in a draft. It could be a weakness that burglars with a plethora of opportunities might exploit, placing your home and belongings at risk of being stolen.
The process of fixing the malfunctioning mechanism begins by gaining access to the frame of the window and removing the damaged handle. The gearbox that opens the handle is then located and the model is identified, so that a replacement may be sourced which matches the profile of internal window frame mechanism.
After the mechanism is replaced the handle can be put back together using the original screws. We recommend replacing them with longer screws since they provide the most secure fit. The final step is to seal the handle with a clear sealant. This will help protect it from further corrosion. After that the window will be functional again, and at only a fraction of the cost of replacing the entire window.
Hinges that are Broken or damaged
If your windows don't close properly, you could suffer from draughts or the weakening of your home's security barrier, and an increased risk of damp or water damage. Windows hinges that break or become faulty are a common issue and can be easily repaired.
If double glazing near me have a uPVC window that won't open or close and close, it's likely that your hinges are damaged or broken and require replacement. Most window companies will require that you purchase a new window unit to fix this simple issue, but we are able to replace the hinges and save you money.
Window hinges are usually damaged by repeated use, or weakening over time due to corrosion. In the event of a broken hinge, it's important to take measures to prevent further damage by taking care not to push the window to close or open.
You can locate the appropriate parts for your hinge by identifying its model. Common types of window hinges are Maco, Mila, Roto and a variety of other brands. It is recommended to speak with an expert in this situation to avoid the mistake of buying parts that aren't compatible with your existing hardware and cause further damage.
Faulty hinges are a major issue for uPVC windows and doors. They can be a significant source of noise and also allow water infiltration that can cause damage to your windows.
Check whether the pin barrels on both hinge halves are aligned. If not, tap the head pin using the hammer to create a small bend in the barrel of the hinge. This will help keep the pin in the right position. Ask a friend to hold the doors while you take off hinge screws and hinges. Replace the hinges and attach screws with glue. Finally, secure the hinges with weights or clamps while the glue sets.
After you have fixed your hinges, you are able to put the door back in place. You could also reattach the handle. Replace the screws with wood dowels of the same length as the original screw to ensure that they are compatible.
Glass that is damaged or damaged
uPVC Windows can be damaged in time, despite the fact they are excellent at keeping out the cold and retaining heat. This can include damaged or broken glass and damaged locks. If left unattended, this can turn into a major expense. It can also detract from the aesthetics of your house and could lead to a loss of insulation, so it's important to repair any damage as quickly as possible.
If your glass has cracked but not shattered, you can usually fix it yourself using the right tools and techniques. Be sure that the area surrounding the broken glass is clear of debris to ensure that pieces of glass do not cause injuries or cause a trip hazard. Then, you must remove any pieces of broken glass and dispose of them properly. Apply masking tape over the entire area. This will stop glass fragments from sticking to your skin and scattering when you move them. If you're dealing with a double-pane glass, it's a good idea pre-fit the pane of glass before gluing it back into place so that you are sure you'll have enough space complete the project.
Use a clean, dry cloth to wipe down the surface of the broken glass and the frame prior to applying the glue. Follow the application and curing instructions, which may vary from product-to-product. Depending on the degree of the crack you may need to hold the glass in place during the curing process with lightweight clamps that are specifically designed to support fragile materials.
Once the adhesive is fully cured, carefully reinstall the glass inside the window frame, ensuring that it is flush with the edge of the frame and that there are no gaps between the glass and the window sash. Be careful to avoid flexing the window as it's being reinstalled, as this can weaken the seal and lead to condensation and water infiltration.
If you have a glass window that is completely shattered or has larger cracks, consult a professional glazier like O'Brien(r) to organise the replacement. It's crucial to act fast when you notice broken glass.