Ghost Immobiliser Install The Good The Bad And The Ugly

Why Should You Have a Ghost Immobiliser Installed?
Autowatch Ghost is the next-generation vehicle immobiliser. It protects your car from theft. It operates quietly by connecting to your vehicle's CAN data network and requires a unique, changing PIN code sequence to be entered in order for the vehicle to start.
The system is quiet, doesn't have LED indications and is undetectable by diagnostic tools. It is also TASSA-approved and recognized by certain insurance companies.
No Key Fobs or LED Indicators
A ghost immobiliser, a revolutionary advancement in security for cars is able to stop thieves from driving even when they are in your vehicle. It connects to the onboard CAN data circuit in your vehicle and communicates quietly, so there are no key fobs or radio signals involved, making it impossible for thieves to evade it. It is also unnoticeable with diagnostics and has no LED indicator that can reveal its position. This makes it a good option for cars that are costly or rare, such as vintage cars.
Autowatch Ghost is a tiny device that can be concealed in your vehicle's loom, making it almost impossible for thieves to find it. The device is connected to the ECU to prevent theft. It taps into the CAN (Controller Area Network) system. It is simple to install and can be installed in less than a half hour. It is also less intrusive than other anti-theft devices, for example steering wheel locks.
The device uses the same technology as GPS tracking devices, however it prevents car theft by stopping the vehicle from getting started. It makes use of buttons inside your vehicle to create an individual and changeable PIN code that has to be entered prior to being able to drive your car. The device can be programmed to utilize obscure buttons, such as those on the back of the rear demister to make it harder for thieves to guess the PIN. This kind of technology is becoming increasingly popular, and numerous insurance companies are now requiring it on vehicles equipped with an entry system that is keyless.
The Ghost also prevents key cloning and hacking. The device is connected to the CAN bus system, and it uses the buttons inside your vehicle to generate a unique, programmable code that needs to be entered before the car will start. It is not able to be defeated by simply putting in new keys or altering the ECU. Instead, the burglar will require a special tool to get around the immobiliser.
The cost of the ghost immobiliser is affordable, and it can be paired with an GPS tracker to ensure your vehicle's security. It's an excellent option for older vehicles and can help you save money on insurance premiums. Contact Trackershop to get an estimate for a ghost immobiliser. We'll include the installation in the cost so that you can be confident about the security of your vehicle.
It is TASSA Approved
Immobilisers are the most effective way to secure your car. It can disable features like the starter motor or fuel pump if the PIN code is not entered correctly. An immobiliser that is professionally installed is vital. The installer must be TASSA approved, as this ensures that the product is safe and functions properly. The process involves examining the credentials of the installer, including a criminal record check and an identity check.
The Ghost immobiliser was designed to stop thieves from stealing vehicles. It is directly connected to the CAN data network of your vehicle and does not require additional fobs or alarm systems. The system is silent and is not able to be identified by car trackers. It makes use of the buttons on your steering wheel, door panels and centre console to create an individual PIN code sequence. The correct sequence must be entered in order to start your car, which makes it incredibly difficult for thieves to hack.
This revolutionary immobiliser is TASSA-approved and can be installed by Trackershop, a company which specializes in the installation of this device. It also offers a variety of other security products for your vehicle, like an anti-theft tracking device and a remote car starter. ghost immobiliser install of technicians is able to install the device at your home or office.
It is crucial to safeguard your vehicle as more and more vehicles are being stolen with keys of the owners. Modern vehicles that are keyless are particularly vulnerable as it is easy to purchase cloning equipment and door lock picks on the internet. Autowatch Ghost is a fantastic way to prevent this as it is not able to be detected by thieves and can't even be picked up by vehicle trackers.
The Ghost II CAN immobiliser is completely hidden, and can't be tampered with by thieves. It detects attempts to tamper the ECU and shut down certain components of the engine in an attempt to disable it. It also disables the alarm system to prevent being the target of attention and allow thieves to flee.
It can be reversed
The Ghost immobiliser is a completely removable security system that is able to be removed and put in place at anytime. It is directly linked to your vehicle's Controller Area Network (CAN) and protects you with an individual PIN code that only you are aware of. If the PIN code has been entered correctly, the vehicle will not start and thieves are discouraged from attempting to steal it.
The installation of the Ghost will not void the warranty of your vehicle. The system can be used with any alarm or tracker that you've installed aftermarket. It also won't leave a trace on the exterior or interior of your car. Contrary to other immobilisers does not employ LED indicators or key fobs, making it difficult for thieves to spot it.
The Ghost Immobiliser is not one of the devices used by organized car thieves to detect circuit wiring on vehicles. It uses buttons on the dashboard or the steering wheel to create a unique PIN code. ghost installations will have to be entered in order to start the vehicle.
The Ghost Immobiliser can also safeguard your vehicle against OBD port hacking. This type of theft is becoming more common and is one of the most difficult to stop. The Ghost Immobiliser helps prevent these thefts because it prevents the thief connecting a laptop into your vehicle's OBD port and cloning keys.
The Ghost can also be used with a car tracker, which is extremely useful in finding your vehicle after it has been taken. However, it is not recommended to utilize a tracker as the main anti-theft security measure, as they do not stop theft in itself. They are also more easily to detect and remove than the Ghost immobiliser.
It is easy to install
A Ghost immobiliser is a groundbreaking new technology that can help safeguard your vehicle from theft. It connects to the CAN (Controller Area Network), which is a system in your car, and generates an unique code that thieves are unable to penetrate. It's a cost-effective and highly effective way to ensure your car is safe from being stolen.
Ghost is designed to work with any vehicle and models, including those with aftermarket key fobs. Ghost generates a unique PIN code that is entered using the buttons on your central console, dashboard, and steering wheel. This will stop thieves from starting your vehicle. It comes with a variety of additional features, like a GPS tracker to locate your vehicle.
Many drivers choose this type of device due to its protection against various types of car theft. It is simple to install, silent and doesn't rely on radio signals. It's a great option for those who don't need a complete alarm system. It is important that an expert installs the product in order to ensure it is working properly.
If you're thinking about a ghost immobiliser, you must have it professionally installed to ensure that it's operating just as it should. A professional will know where to put it and will make sure that the device is connected to your vehicle's electronic system. The installer will ensure that the device is kept hidden and is not visible to anyone without an explanation.
The Autowatch Ghost II can be set to Valet/Service mode, which allows you to drive your vehicle at 30 mph without the access key. This makes it ideal for valet parking and transporting your vehicle. This mode can be used even when your car is being repaired by dealers. This mode can be disabled using the companion app, and reset at the end of each use.
The Ghost is the only aftermarket CAN-bus immobiliser that does not require cutting wires. It is directly connected to your vehicle's network of CAN and is not detected by diagnostic tools or cloning devices. It's tamper-proof, operates silently and doesn't emit any radio signals. It's also reversible, which allows you to shift it to another vehicle in the event of need.